Carbon wheel disks and moulds
Printed From: BHPC Forum
Category: Public: Open to anyone
Forum Name: For Sale
Forum Description: Something to sell or give away? Advertise it here
URL: http://forum.bhpc.org.uk/forum_posts.asp?TID=4362
Printed Date: 21 April 2021 at 12:16pm
Software Version: Web Wiz Forums 11.02 - http://www.webwizforums.com
Topic: Carbon wheel disks and moulds
Posted By: bazz
Subject: Carbon wheel disks and moulds
Date Posted: 13 August 2011 at 6:17pm
|
How Do All ;-)
I have a pair of home made Carbon wheel disks which I no longer require and have no room for; along with some home made moulds for them, maybe of interest to anyone wanting to try disking their rear wheel or maybe have a go at making some disks,
The disks are held to the rim with small rubber bands over Carbon clips, and a few zip ties at the hub.
 there is also a split gauge which I used to measure the dishing should you want to make some more moulds.
The carbon disks are for a 26" wheel with disk brake hub, the disks can be spit and re-joined if needed to correct the dish to a particular wheel, as I did on the drive side.
The finished moulds would benefit from a little filler along the join line as there is a small ridge I was not too fussy about that though.
please see the pictures in this album for details.
https://picasaweb.google.com/117651459347243991935/NewBikeStuff - https://picasaweb.google.com/117651459347243991935/NewBikeStuff
If anyone would like to slip me £20 for the above, I can arrange to bring the lot to Hillingdon.
Take care,
Barry ;-)
|
Replies:
Posted By: bazz
Date Posted: 16 August 2011 at 8:54pm
|
Now Taken; Pending collection.
Thank you,
Barry ;-)
|